If the projector turns on but shows “no signal”, the cause may be in the projector, in the cable or in the source. Do the simple checks first; if the problem remains, we check the projector's port and board.
Check it yourself
- Select the correct input (HDMI 1, HDMI 2, VGA) in the projector menu.
- Try another cable and another source (laptop, player).
- On a laptop, send the picture to a second screen (Win + P in Windows).
- Long cables and cables with adapters weaken the signal — try a short cable.
Causes in the projector itself
| Symptom | Likely cause |
| The HDMI port is loose, the picture disappears when the cable moves | Port contacts or solder joints |
| Does not detect any source | HDMI receiver, main board |
| Picture but no sound, or the other way round | Settings, audio circuit on the board |
| The picture flickers, colors are distorted | Cable, port, signal processing |
A damaged HDMI port is replaced by soldering, and the signal circuit on the board is restored. Repairs start from 50 AZN; we quote the exact price after diagnostics. The projector goes through a long test run, and we give a warranty on the work done. All services — projector repair.