In a DLP projector the picture is created by the DMD chip: it carries hundreds of thousands of microscopic mirrors, and each of them is one pixel. Over time, especially because of overheating, some of the mirrors get “stuck” in one position — permanent white or black dots appear on the screen. At first there are only a few dots, then their number grows.
Dots or dust
| Symptom | Cause |
| Small, sharp white dots in the same place on every image | DMD chip — replaced |
| Dull, blurry spots | Dust in the optics — cleaned |
| The picture is “snowy”, there are many dots | DMD chip or its board |
| Colors are distorted or flicker, noise from the wheel | Color wheel and its motor |
A faint “rainbow” effect — colored stripes that appear when you quickly move your eyes across the picture — is normal for single-chip DLP projectors and is not a fault.
How we repair it
- We check what kind of dots they are: chip, dust or board.
- The DMD chip is replaced with a new one that matches the model, and the optical block is cleaned.
- The cause of overheating — dust, fan, heatsink — is eliminated so that the new chip does not wear out quickly too.
- The projector runs for a long time; we give a warranty on the work.
DLP projectors: BenQ, Optoma, Acer, ViewSonic, LG, as well as some Panasonic and NEC models. LCD projectors do not get such dots — there, spots come from dust and ageing panels: optics cleaning. Repairs start from 50 AZN; we quote the exact price after diagnostics. The projector goes through a long test run, and we give a warranty on the work done. All services — projector repair.