Microwave control board and inverter board repair

No power, dark display, inverter errors: control board and inverter board.

A microwave’s control board runs the timer, power levels, grill and convection modes: through relays it switches on the magnetron, the turntable motor and the fan. In inverter ovens (for example, Panasonic Inverter), a separate inverter board takes the place of the transformer and supplies high voltage to the magnetron. We repair both boards at component level. Repairs start from 50 AZN.

Symptoms and causes

SymptomLikely cause
The oven does not turn on, the display is dark, the fuse is intactBoard power supply: transformer, capacitors, voltage regulator
The display is on, but nothing happens on startRelay or the transistor that drives it
Buttons do not respond or press themselvesKeypad or its inputs on the board, moisture
An inverter oven does not heat and shows an error code (for example, H97, H98)Inverter board, magnetron
Display segments missing, broken digitsDisplay, its power supply

How we repair

  1. The board’s power supply, relays and control circuits are measured; the power components of the inverter board are tested.
  2. Burnt components are replaced, corrosion caused by moisture is cleaned off, solder joints are restored.
  3. The oven is tested in all modes; we give a warranty on the work.

A new board is often expensive and cannot be found for some models, while a repair usually means replacing one or two components. The buttons themselves — door lock and keypad. Boards of other appliances — electronic board repair.

Repairing a microwave control board

Get a repair quote

Choose your device and leave your number — we will contact you as soon as possible.

Thank you! Your request is received — we will contact you as soon as possible.

Prices

Microwave control board and inverter board repairfrom 50 AZN

These are starting prices: we tell you the exact amount after diagnostics.

FAQ

Frequently asked questions

My Panasonic inverter microwave shows H97. Can it be repaired?

Yes. H97 and H98 are usually related to the inverter board or the magnetron; after testing, the faulty part is repaired.

Can a microwave control board be repaired?

Yes, in most cases: burnt components are replaced and the board is restored.

Contacts

Send a request — we will quote the price

Google Maps loads only when you press the button

Get a price

Leave your number — we will contact you as soon as possible.

Thank you! Your request is received — we will contact you as soon as possible.