Vestel service in Baku: TVs, washing machines, refrigerators

We repair Vestel TVs, washing machine modules and refrigerator electronics at our service center: diagnostics, the price before work starts, and a warranty.

Get a repair quote

Choose your device and leave your number — we will contact you as soon as possible.

Thank you! Your request is received — we will contact you as soon as possible.

Vestel is one of the largest electronics manufacturers in Turkey. Innova Service has been repairing electronics in Baku since 2008: we repair Vestel TVs and, in washing machines and refrigerators, the electronic part — the module, the board, the sensors. Repairs are carried out at our service center: diagnostics first, then the price, quoted before work starts. We give a warranty on the work done.

Vestel TVs

Vestel makes its TVs at its factory in Manisa; for the European market it has also produced Toshiba, JVC and Telefunken TVs under license, so Vestel boards are found in many models of these brands. Typical faults: the backlight (sound but a black or dim screen), the power supply or the main board (the TV does not turn on, the indicator blinks), the Smart TV software (the menu freezes, the TV will not start after an update), lines on the screen — the panel, the ribbon cable or the T-Con. More: Vestel TV repair.

Vestel washing machines

The electronics of Vestel machines are simple and easy to repair: the main module controls the power supply, the valve, the pump, the door lock, the heating and the motor. Models with a display report faults with an E code: E01 — the door is not closed, E02 — no water coming in, E03 — no draining, E04 — overflow, E05 — heating or the temperature sensor; the same code may mean different things on different models. If the touch panel does not respond, we check the display board and its link to the module; if the machine takes in water but the drum does not turn, the motor control in the module. Mechanical faults such as the belt and bearings are outside our scope. More: Vestel washing machine service.

Vestel refrigerators

In simple Vestel models the compressor is started by a start relay and a thermal relay, while in electronically controlled No Frost models sensors measure the temperature and the board drives the compressor, the fan and the defrost. If a No Frost model ices up or the lower compartment stays warm, the cause is the defrost control, the defrost sensor or the fan; if the compressor does not start, the start relay, the thermal relay or the relay on the board; if the display shows an error, the sensors and the board inputs. Refrigerant and compressor replacement are outside our scope. More: Vestel refrigerator repair.

How we work

  • Diagnostics. We confirm the code or symptom by measurement at our service center.
  • Price in advance. We quote the exact price before work starts.
  • Component-level repair. We replace the burned-out triac, relay or power component in the module and on the board.
  • Testing and warranty. After the repair we test all module outputs under load and give a warranty on the work done.

Prices

Vestel tvfrom 60 AZN
Vestel washing machine repairfrom 80 AZN
Vestel refrigerator repairfrom 80 AZN

These are starting prices: we tell you the exact amount after diagnostics.

FAQ

Frequently asked questions

Where is the Vestel service center?

Innova Service is in Baku, at 5a Ahmad Rajabli Street, Life Centre. This is where we repair Vestel TVs, washing machines and refrigerators.

My Vestel washing machine does not spin. Do you repair it?

If the cause is in the electronics — the motor or pump control in the module — yes. Mechanical faults such as the belt and bearings are outside our scope; after diagnostics we tell you exactly what the problem is.

My Vestel washing machine shows the E03 code. What should I do?

Unplug the machine, place a container under the filter, drain the water and clean the filter. If the code comes back, the pump and the module output that controls it need to be checked.

Do you give a warranty on repairs?

Yes, we give a warranty on the work done. We quote the price after diagnostics, before work starts.

Contacts

Send a request — we will quote the price

Google Maps loads only when you press the button

Get a price

Leave your number — we will contact you as soon as possible.

Thank you! Your request is received — we will contact you as soon as possible.