LG service in Baku: TVs, washing machines, refrigerators, monitors, projectors
We repair LG TVs, washing machines, refrigerators, monitors and projectors at our service center: diagnostics, the price before work starts, and a warranty on the work.
Which LG devices we repair
-
LG TV
OLED, QNED, NanoCell and UHD: screen and backlight, boards, webOS software.
-
LG projector repair
CineBeam, Minibeam: light source, power supply, optics, board.
-
LG monitor
-
LG washing machine repair
Direct Drive machines: the inverter on the main board, the Hall sensor and the power section — the causes of the LE, IE and OE codes.
-
LG refrigerator repair
Smart Inverter and Linear compressor: main board, display, sensors and the causes of Er codes.
Get a repair quote
Choose your device and leave your number — we will contact you as soon as possible.
We repair five types of LG appliances: TVs, monitors, washing machines, refrigerators and projectors. Innova Service has been repairing electronics in Baku since 2008, and all work is carried out at our service center: diagnostics first, then the price, quoted before work starts. We give a warranty on the work done. We do not repair LG phones.
LG TVs
We repair OLED (B, C and G series), QNED, NanoCell and UHD models, as well as older LED TVs. Most LG faults are related to the screen: on LED and NanoCell models, sound with a black screen means the backlight; on OLED, vertical lines or colored bands mean the panel or its ribbon cable. OLED burn-in cannot be repaired — the only solution is replacing the panel. If the TV gets stuck on the LG logo, the cause is the webOS software or the memory chip. More: LG TV and screen repair; search by model code (for example OLED55C16LA) — LG TV models.
LG monitors
We repair UltraGear gaming monitors, UltraWide and UltraFine models, and office monitors. If a monitor does not turn on, the cause is most often the power supply or the external adapter; if the indicator is on but the screen is black, the backlight or its driver; if it says “no signal”, the HDMI / DisplayPort port or the main board. More: LG monitor repair.
LG washing machines
What sets LG machines apart is the Direct Drive motor: it has no belt, it is mounted directly on the drum, and it is controlled by the inverter on the main board. With the LE code — the motor does not turn — the cause is most often not the motor itself but the Hall sensor, its wiring or the inverter's power module. The IE and OE codes relate to water filling and draining, tE to heating; CL is not a fault — the child lock is on. More: LG washing machine service.
LG refrigerators
Most LG refrigerators have an inverter compressor (Smart Inverter, Linear in many models), driven by a driver on the main board. The display reports faults with “Er” codes: Er CO — no communication between the panel and the main board, Er dH — the defrost circuit, Er FF — the freezer fan. If the compressor does not run, the cause is most often its driver; replacing the compressor itself and refrigerant work are outside our scope. More: LG refrigerator repair.
LG projectors
CineBeam and Minibeam projectors are lampless: the light source is a laser or LEDs, and most of them use DLP technology. If the projector does not turn on, we check the power supply or the board; if the picture is dim, the light source power supply and the cooling; if there are white dots on the screen, the DMD chip. More: LG projector repair.
LG TV: the cause by symptom
- Does not turn on, the indicator is off. The power supply: capacitors, the power IC, the fuse.
- Turns on and goes off after a few seconds. The TV goes into protection — the cause is in the backlight, the power supply or the main board.
- Sound but a black screen. On LED and NanoCell models, the backlight or its driver.
- Half or part of the screen is dark, there are vertical lines. A backlight strip, the T-Con board or the panel ribbon cable.
- Stuck on the logo, webOS freezes. The software or the memory chip.
- No picture over HDMI, Wi-Fi does not connect. The port, the main board or the wireless module.
LG washing machine error codes and what we check
LG machines report a fault with a two-letter code. A code does not name the broken part; it says that an expected event did not happen, so our technicians first rule out simple causes and then measure the electronics.
| Code | Meaning | What we check |
|---|---|---|
| IE | No water coming in | The tap and the hose, then the board output that switches the valve |
| OE | No draining | The filter and the hose, then the pump control output |
| UE | Unbalanced load | The load first; if it repeats, the speed signal |
| dE | Door | The door lock and its confirmation circuit |
| tE | Heating or the temperature sensor | The sensor resistance and the heater relay |
| LE | The motor does not turn | The Hall sensor, its wiring and the inverter power module |
| CE | Motor overload | The inverter power section and the motor circuit |
| SE | Rotor position (Hall) sensor | The sensor itself, the connector and the board input |
| FE | Overflow — too much water | The valve control and the water level sensor |
| PE | Water level sensor | The sensor, its tube and the board input |
| AE | Leak — the aquastop has tripped | The leak sensor and its circuit; the leak itself is mechanical |
| PF | Power was lost during the program | If it happens often, the board power section |
CL and tCL are not faults: the first means the child lock is on, the second that it is time to clean the drum.
LG air conditioners
We also repair the electronics of LG air conditioners: the indoor and outdoor unit boards, the inverter board and its power module, the temperature sensors (thermistors), the fan control and the link between the units. If the air conditioner does not turn on, the outdoor unit does not run or an error code is shown on the display, the cause is often in these parts. Installation, cleaning, refrigerant charging and compressor replacement are outside our scope, and we do not repair remote controls.
LG dishwashers
In LG dishwashers we repair the control module and its power section, the relay that controls water heating, the control of the pumps and the water valve, the sensors and the leak protection circuit. If the machine does not turn on, washes in cold water or stops the program halfway, we first confirm by measurement that the cause is in the electronics. Mechanical work and installation are outside our scope.
LG appliances in and out of warranty
We repair LG household appliances, TVs and monitors regardless of their age and whether the factory warranty is still valid. Most of our customers come to us with devices whose warranty has already expired — new boards for older models are no longer sold, and component-level repair keeps the device working. If the seller's warranty is still valid, we advise checking its terms first. We give our own warranty on the work we do.
Why people come to us for LG service
- Specialization in electronics. Since 2008 the same technicians, with the same measuring equipment, have been repairing the boards of TVs, monitors and household appliances.
- Component-level repair. Instead of replacing the whole board we find the faulty component — this is often much cheaper.
- We save the panel. If a black screen is caused by the backlight, we do not replace the panel.
- An honest diagnosis. If the repair is not worthwhile or the cause is mechanical, we say so openly.
What to tell us when you contact us
- The model code. On TVs and monitors it is on the label on the back panel, on washing machines on the door frame or at the back, on refrigerators inside the compartment.
- The error code and the symptom. Tell us the code on the display, and for a TV, whether there is sound and what the screen looks like.
- How the fault started. If it appeared after a power cut, an impact or liquid getting inside, mention it.
- Previous repairs. If the device has already been opened elsewhere, tell us — our technicians take it into account during diagnostics.
How we work
- Diagnostics. We confirm the cause by measurement at our service center.
- Price in advance. For expensive work such as OLED panel replacement we quote the price in advance, and you decide.
- Component-level repair. In LG washing machines the main board and the inverter are one board, so replacing the faulty component is more cost-effective than replacing the whole board.
- Testing and warranty. After the repair we test the device under load and give a warranty on the work done; the warranty period depends on the appliance and the work.
LG microwaves and vacuum cleaners
We repair the electronics of LG microwave ovens (including NeoChef): the control board, the power section, the display and the buttons. In LG vacuum cleaners, including cordless CordZero models and robot vacuums, we check the board, the battery charging and management circuit, and the motor control.
LG washer-dryers and tumble dryers
In LG washer-dryers, washing and drying are controlled by the same module, while standalone tumble dryers have their own. We repair the electronics of these machines: the control module and its power section, the inverter of the Direct Drive motor, the relay that switches the drying heater, the temperature and humidity sensor circuits and, in heat pump models, the compressor driver. If the machine does not dry, stops the program halfway or shows an error code, first check the lint filter and the condensate container; after that we pin down the cause by measurement. The drum, the belt, the bearings, and replacing the heating element or the fan are mechanical work and outside our scope.
LG TV software update
You can update the software of an LG TV yourself: in the webOS settings, open the “Support” or “General” section, choose the software update and wait for it to download over the internet. Without an internet connection, the update file can be downloaded from the LG website to a USB flash drive. Do not switch the TV off or unplug it during the update: if the process is interrupted, the software in the memory chip gets corrupted. The TV then gets stuck on the LG logo, restarts in a loop or does not turn on at all. In that case we reflash the memory (eMMC) with a programmer, and if the chip itself is faulty, we replace it. An update helps apps work properly, but it does not fix a hardware fault — the backlight, the power supply or the panel.
Prices
| LG TV | from 60 AZN |
|---|---|
| LG projector repair | from 50 AZN |
| LG monitor | from 30 AZN |
| LG washing machine repair | from 80 AZN |
| LG refrigerator repair | from 80 AZN |
These are starting prices: we tell you the exact amount after diagnostics.
Frequently asked questions
Where is the LG service center?
Innova Service is in Baku, at 5a Ahmad Rajabli Street, Life Centre. This is where we repair LG TVs, washing machines, refrigerators, monitors and projectors.
Do you repair LG TV screens?
Yes. On LED and NanoCell models a black screen is most often caused by the backlight and is repaired without replacing the panel. If the panel is cracked or an OLED has burn-in, we replace it when a matching panel is available; we quote the price in advance.
My LG washing machine shows the LE code. Does the motor need replacing?
Usually not: the cause is the Hall sensor, its wiring or the inverter's power module. We confirm it by measurement and repair the board at component level.
Does the LG service center only accept devices under warranty?
No. We repair LG appliances regardless of the factory warranty, where they were bought and how old they are. If the seller's warranty is still valid, check its terms first; we give a separate warranty on our repair.
Do you repair LG air conditioners?
Yes, their electronics: the indoor and outdoor unit boards, the inverter board, the sensors and the fan control. Installation, cleaning, refrigerant and the compressor are outside our scope.
My LG TV is stuck on the logo. Can it be repaired?
Yes. The cause is most often the webOS software or the memory chip: we restore the software and, if necessary, replace the memory chip. We quote the price after diagnostics.
My LG washing machine shows OE. What should I do?
First check the drain filter at the bottom and the drain hose. If they are clean and the code comes back, the cause is the pump or the board output that controls it. We repair the board output; replacing the pump itself is mechanical work.
My LG monitor does not turn on. Can it be repaired?
Yes. Most often the cause is the external adapter or the internal power supply; if the indicator is on but the screen is black, the backlight. Our technicians find the cause by measurement and quote the price before work starts.
What is the warranty on an LG repair?
We give a warranty on all types of repair. The period depends on the appliance and the work done — we tell you after the repair.
Is diagnostics paid?
Yes, diagnostics is paid: the technician finds the cause by measurement, and then we quote the exact repair price. We start work only with your approval.
Do you give a warranty on repairs?
Yes, we give a warranty on the work done. We quote the price after diagnostics, before work starts.
My LG appliance has broken down. What should I do first?
Unplug it and do not keep trying to switch it on: a faulty power supply can damage other boards too. Write down the model code and the error code on the display, and note what happened before the fault. If you send a photo or video on WhatsApp, we will give a preliminary estimate; the exact price is quoted after diagnostics.
How do I complain to LG about an LG product?
If the device is under the factory warranty, contact the seller or LG customer support — the contact details are on the LG website. Keep the receipt and the warranty card, and describe the model, the serial number and the fault. We are a repair service: if the warranty has expired or you decide to have the repair done with us, we find the cause by measurement and give a warranty on the work done.
What is a common issue with LG TVs?
On LED and NanoCell models it is backlight failure: there is sound, but the screen is black. OLED models more often get vertical lines and burn-in, and across all series there are TVs stuck on the LG logo (software or memory chip) and power supply failures after voltage surges.
Send a request — we will quote the price
- 070 262 19 19Call us
-
5a Ahmad Rajabli St. (Life Centre)Baku, AZ1052
-
Mon — Fri, 10:00–18:00Sat, Sun — closed
- service@innova.azEmail