BenQ service in Baku: monitor and projector repair
We repair BenQ monitors (ZOWIE, MOBIUZ, GW, PD) and DLP projectors: power supply, backlight, main board, screen; on projectors — lamp, DMD chip and color wheel.
Which BenQ devices we repair
Get a repair quote
Choose your device and leave your number — we will contact you as soon as possible.
Innova Service has been repairing electronics in Baku since 2008. BenQ is a Taiwanese brand known for its monitors and DLP projectors. We repair both: we find the fault during diagnostics at our service center, quote the price before any work starts and give a warranty on the work done.
BenQ monitor repair
BenQ has several monitor lines: ZOWIE XL — high-refresh esports monitors, MOBIUZ — gaming monitors, GW — for home and office, PD — for designers, RD — for programmers. Our catalog lists more than 280 BenQ monitor models: ZOWIE XL2566K and XL2546K, XL2730Z, GW2280, GW2480, EW3270ZL, PD2730S, RD280U and others. Typical faults:
- no power, the indicator is off — power supply or adapter;
- the indicator is on, but the screen is black or the picture goes dark — backlight and its driver;
- lines, spots, wrong colors — T-Con board, panel cable or the panel itself;
- "No signal" — HDMI or DisplayPort port, main board.
After a repair we test high-refresh monitors such as ZOWIE and MOBIUZ at every refresh rate and in different modes. Find your model on the BenQ monitor repair page.
BenQ projector repair
BenQ projectors — the MS, MW, MX and MH series, plus home cinema models such as the TK800, TK850, W1070 and W2700 — use DLP technology: a DMD chip and a color wheel. White dots on the screen are a fault of the DMD chip, and the chip is replaced. If the color wheel is noisy and the colors are distorted, we replace the wheel or its motor. If the lamp won't light, we check the lamp and the ballast; if the projector overheats and shuts down — dust, the fan and the temperature sensor. More details — BenQ projector repair.
How we work
- Diagnostics take place at our service center: we check the power circuits, boards, the backlight or light source, cooling and ports, and read the error indicators.
- We name the cause and the price before work starts; nothing is repaired without your approval.
- We replace the faulty part or restore it at component level; projectors are cleaned of dust inside.
- After the repair we run the device for a long time and give a warranty on the work done.
Prices
| BenQ projector repair | from 50 AZN |
|---|---|
| BenQ monitor | from 30 AZN |
These are starting prices: we tell you the exact amount after diagnostics.
Frequently asked questions
Where is the BenQ service center?
Innova Service is in Baku, at 5a Ahmad Rajabli Street, Life Centre. This is where we repair BenQ monitors and projectors; opening hours are Monday to Friday, 10:00–18:00.
My BenQ projector won't turn on. What could be the cause?
Look at the indicators: their color and the number of blinks point to the error. If no indicator lights up, the power supply is the usual cause; if the lamp or temperature indicator is on — the lamp, the ballast, the fan or the temperature sensor.
Do you replace BenQ projector lamps?
Yes, the lamp is replaced with one that matches the model. You can check the lamp's operating hours in the projector menu.
Do you repair BenQ ZOWIE monitors?
Yes. We repair the power supply, backlight, main board and ports of ZOWIE XL and other high-refresh monitors, and after the repair we test the monitor at every refresh rate.
Send a request — we will quote the price
- 070 262 19 19Call us
-
5a Ahmad Rajabli St. (Life Centre)Baku, AZ1052
-
Mon — Fri, 10:00–18:00Sat, Sun — closed
- service@innova.azEmail

